Epson Action Laser II - Manual (Page 103)

Using
the SUB CONFIG Option
CONDENSED OFF
* OFF
ON
You can use this option to change the character spacing. Condensed
printing is useful for spreadsheets and other applications where you
need to fit the maximum amount of information on each line. The
15 cpi character pitch cannot be condensed.
L-MARGIN 0
0 to available
This option allows you to set the left margin position. Margin units
are determined by the current pitch (characters per inch) and the
condensed setting (on or off). If you select proportional, 10 cpi and
condensed are used to determine margin units. If you change the
setting of ORIENT, P-SIZE, or WIDE PAGE (when P-SIZE is set to
A4 or F4) the left margin defaults to 0. The factory setting is 0.
R - M A R G I N 8 0
1 to available
This option allows you to set the right margin. Margin units are
determined by current pitch (characters per inch) and the condensed
setting (on or off). If proportional is selected, 10 cpi and condensed
are used to determine margin units. The factory setting is 80. If you
change the setting of ORIENT, P-SIZE, or WIDE PAGE (when
P-SIZE is set to A4 or F4) the right margin defaults to the settings in
the following table:
SelecType
4-39