Epson Action Laser II - Manual (Page 108)

Using the SUB CONFIG Option
W I D E P A G E O N
OFF
*ON
When this option is on, you can print up to 80 characters at 10 cpi
across an A4 or F4-size page. When it is off, you can print up to 77
characters at 10 cpi. This setting is only valid when P-SIZE is set to
A4 or F4. If you change
the
WIDE PAGE setting when sizes other
than A4 or F4 are selected with the P-SIZE option, L-MARGIN
automatically defaults to 0 and R-MARGIN and TEXT LINES return
to the default settings for the currently-selected paper size.
B-IMAGE DARK
* DARK
LIGHT
BCODE
With B-IMAGE set to DARK or LIGHT, your printer can correctly
emulate
the
graphics densities set with the printer commands. When
DARK is selected, the bit image density is high. When LIGHT is
selected, the bit image density is low.
The BCODE setting converts bar codes to bit images by
automatically filling in any vertical gaps between dots. This
produces unbroken vertical lines that can then be read by a bar code
reader.
Note: This mode reduces the size of the image being printed and
may
cause some distortion when printing bit image graphics.
4-44 SelecType