Epson Action Laser II - Manual (Page 79)

SelecType Options
STATUS SHEET
Use this option to print a status sheet that lists the current printer
settings. When you reach this option, press
D
twice to print the
status sheet. See Selecting and printing a status sheet in Chapter 2.
Printer Configuration
STATUS SHEET EPSON
Installed Memory : 3.OMbytes
CH Mode : AUTO-SENSE
Auto Continue : OFF
Controller Version : 15.04
CH Time out
: 28
Total Printed Count: 25
Standby : DISABLE
CH : P
Mode : LJ-2P Version
I/F : PARALLEL
PARALLEL (CH P)
SLCTIN : OFF AUTOFEED : OFF
SERIAL (CH S) : RS232C
Word Length(bit) : 8 Baudrate(bps) : 9600
Stop Bit : 2 DTR : ON
DSR
: OFF
CTS : OFF
: 17.04
BUSY Delayµs) : 0
Parity : NONE
XON/XOFF : ON
ENQ/ACK : OFF
Receive Buffer : 1Kbytes
Mode Configuration
Input Tray : AUTO Font : RD-0
Copies : 1 Orientation : PORT
Sub Configuration
Form Length : 60 Symbol Set : Roman-8
System Configuration
Paper Size : LETTER
Top Offset : 0 Left offset : 0
Full Print : 0 Memory Left : 2949Kbytes
Load Macro : 0 Power On Macro : 0
FONT SAMPLE
Use this option to print out all bit-map and scalable fonts in the
printer. When you reach this option, press
D
twice to print the font
sample sheets.
SelecType
4-15