Epson Action Laser II - Manual (Page 173)

Paper Handling
CAUTION:
When you press the
RESET
button, any data remaining
in the printer is lost.
If you continue to print using paper that is smaller
than the size of paper set with your software, toner
may accumulate inside
the
photoconductor unit and
damage it. Make sure you set the P-SIZE setting to
match
the paper you are using. If the AUTO CONT
option is on, the paper size error is detected but
cleared automatically and printing continues. In most
cases, leave AUTO CONT set to off.
7-28 Troubleshooting