Epson Action Laser II - Manual (Page 97)

SelecType Options
VERSION
This option displays the version number of the printer’s controller
and font. Press to see the C-ROM version number, and then press
to see the FONT version number.
PAGE COUNTER ##
This option displays the number of sheets printed since the printer
was installed. Press to display the following:
This option displays the number of sheets printed for the current
photoconductor unit.
STANDBY DISABLE
ENABLE
* DISABLE
The standby mode is designed to save power by reducing the power
to the fixing heater whenever no panel buttons are pushed and no
data is sent to the printer for 30 minutes. In this mode the printer
begins warming up as soon as you press any button or send any
data, becoming ready to print within 45 seconds. The default is
DISABLE, which keeps the printer warmed up and ready to print at
all times.
Note: If the power is on and you do not use the printer for eight
hours, it automatically enters standby mode, even if the standby
mode is disabled.
SelecType
4 - 3 3