Epson Action Laser II - Manual (Page 150)

Status and Error Messages
[E] PAPER OUT [paper source] [paper size]
There is no paper in the paper source from which
the
printer
expects to feed paper. The right column of the display prompts
you to load the correct paper size into the paper source.
[E] PAPER SIZE ERROR
The paper size you selected with SelecType (or the default size if
you have
not
selected
a
size) does
not match
the paper loaded in
the selected paper source. Press
CONTINUE
to clear the error.
Insert the correct paper or
change the
P-SIZE setting with your
application software or with SelecType as described in
Chapter 4.
[S] PRINTING
The printer
has
received data and is printing.
[S] PRINT STOP
The printer stops printing during a multi-copy print operation.
[S] RAM Check X.X MB
The printer is checking RAM (X.X = capacity).
[S] READY
The printer is ready to print.
[E] REINSERT CARD
If this message appears
on
the display, you may
have
removed
an identity card or a font cartridge while the
FEED
light was still
lit or while the printer was on line. To correct the error, make
sure
the
printer is off line. Next, reinsert the card or cartridge and
press
CONTINUE.
E REMOVE CARD
You
may
have inserted an identity card or a font cartridge while
the printer was on line or while the
FEED
light was on. To correct
this error, take the printer off line, then remove the card or
cartridge and press
CONTINUE.
Before reinserting the card or
cartridge, make sure that all data in the buffer has been printed
and
that
the printer is off line. If
the FEED
light is on, press
FEED
to print out the remaining data.
Troubleshooting 7-5