Epson Action Laser II - Manual (Page 149)

Status and Error Messages
[E] ILLEGAL CARD
A card in the card slot or a cartridge in the cartridge slot cannot
be read. To correct this error, take the printer off line and then
press
CONTINUE.
If the error message remains, make sure the
printer is off line and remove the card or the cartridge.
[S] INITIALIZE
The printer is being initialized to the factory or optional settings.
[E] INSUFF MEMORY
The printer has insufficient memory available for the task you
have given it. To correct the error, press
CONTINUE. If
the message
remains, press
RESET
or perform INITIALIZE as described in
Chapter 4. This error can also be cleared by turning the printer
off and back on again. However, it may be necessary to simplify
the page you are trying to print or add more memory to the
printer. See Appendix A for information on adding memory.
[E] PAGE BUFFER FULL
Text or graphics data has filled the printer’s buffer and an
incomplete page is ejected. Press
CONTINUE
to clear the error. You
may need to add more memory to the printer. See Appendix A
for information on adding memory.
[S] PAPER FEEDING
The printer is feeding paper.
[E] PAPER JAM
Paper is not being fed into the printer or paper is jammed inside
the paper path. See the PAPER JAM section later in this chapter.
[E] PAPER OUT
There is no paper in the standard paper cassette or the optional
multi-media feeder (if installed). Insert more paper into the
selected paper cassette or manually feed a sheet of a paper into
the printer. See Chapter 5 for more information on loading
paper.
7-4 Troubleshooting