Silvercrest SIUR 10 A1 - Manual (Page 142)

139 SIUR 10 A1
GB
Setting the NAP timer
The device is provided with a separate timer function with an adjustable alarm
time of 1 - 120 minutes.
Precondition: The device is in clock/standby operating mode.
♦ Touch the NAP control point on the device or press the i key
on the remote control. NAP will appear on the display , and the minute
display blinks.
♦ Press the i /i control points / on the device or press then i /i
keys / on the remote control to set the required number of minutes
after whose expiry the alarm will sound.
♦ Confi rm the setting by touching the Set|OK control point on the device
or press the Set OK key on the remote control. The number of minutes
after whose expiry a louder tone will be sounded is now shown beneath
the time display.
♦ You can turn the alarm off by touching any control point or pressing any key.
♦ In order to turn the NAP time off early, press and hold the NAP control
point
on the device until the date display is shown again.
Setting the alarm function
The device off ers you an alarm function with 2 separately adjustable parameters.
Precondition: The device is in the clock/standby operating mode.
♦ Touch the AL1 or AL2 control point on the device, or press the AL1
or AL2 key on the remote control to call up the settings for Alarm 1 or 2.
The alarm display will be shown, and the weekday abbreviation will blink
in the display
. Use the i /i control points / on the device or the
i /i keys / on the remote control to select the required weekday or
group of days for the alarm:
MO =
Monday
TU = Tuesday
WE = Wednesday
TH = Thursday
FR = Friday
SA = Saturday
SU = Sunday
WEEK 1 - 7 = every weekday
WEEK 1 - 5 = Monday to Friday
WEEK 6 - 7 = Saturday and Sunday
♦ Next, touch the control point or press the i key on the
remote control. The alarm time hour display will now blink.
IB_86209_SIUR10A1_LB1.indb 139 IB_86209_SIUR10A1_LB1.indb 139 11.03.13 09:21 11.03.13 09:21