Silvercrest SIUR 10 A1 - Manual (Page 150)

147 SIUR 10 A1
GB
Fault rectifi cation
This section contains important information on fault localisation and rectifi cation.
Follow the instructions to avert hazards and damage.
WARNING
To avoid risks and property damage, pay heed to the following safety instructions:
► Repairs to electrical devices may only be carried out by specialists trained
by the manufacturer. Improper repairs can represent considerable risk to
users and can cause damage to the device.
Fault causes and rectifi cation
The following table will help with localising and remedying minor malfunctions:
Defect Possible cause Rectifi cation
The display
indicates nothing.
The plug is not connected.
Insert the plug into the mains power
socket.
The mains power socket is
not supplying power.
Check the house fuse.
No sound.
The volume is set to minimum. Increase the playback volume.
The radio is switched off . Switch the radio on.
Interference with
the radio reception.
The transmitter is not prop-
erly adjusted.
Adjust the station correctly.
The reception is weak.
Try placing the cable antenna in a
diff erent direction in order to improve
reception.
NOTE
► If you cannot solve the problem using any of the aforementioned methods,
please contact the Customer Service department.
IB_86209_SIUR10A1_LB1.indb 147 IB_86209_SIUR10A1_LB1.indb 147 11.03.13 09:21 11.03.13 09:21