Additional functions, Locking controls, Manual dimmer control – Silvercrest SIUR 10 A1 User Manual
Page 148: Sound settings
145
SIUR 10 A1
GB
♦
Touch the
control point
on the device or press the i
key
on the remote control to jump to the start of the next track.
♦
Touch the
control point
on the device or press the i
key
on the remote control to jump to the start of the previous track.
♦
To start a forwards or backwards search, press either the
control
point
or
control point
on the device or press the i
key
or i
key
on the remote control for 3 seconds.
Additional functions
Locking controls
You can lock the device controls against unintentional touching.
Precondition: The device is in clock/standby operating mode.
♦
Press the key lock control point
for approx. 3 seconds or press the key
lock key
on the remote control. A key symbol
then appears on the
display
and all controls on the device are locked with the exception of
the manual dimmer control. If you attempt to operate the device (even using
the remote control) only
LOCK
is shown in the display
.
♦
To cancel the lock, press the key lock control point
for around 3 seconds
or press the key lock key
on the remote control. The key symbol will
disappear from the display
and all controls will be released again.
Manual dimmer control
3 settings are available for the background illumination:
"HI" (= undimmed), "MI" (= slightly dimmed) and "LO" (= dimmed).
♦
Press the Dimmer control point
or press the Dimmer key
on the
remote control to adjust the background illumination as required.
Sound settings
♦
Press the EQ key
on the remote control repeatedly to activate the sound
presettings for CLASSIC => JAZZ => POP => ROCK => FLAT (no sound
equalisation) one after the other.
♦
Keep the EQ key
pressed to adjust the bass and treble as required using
the TONE +/– keys
/
.
IB_86209_SIUR10A1_LB1.indb 145
IB_86209_SIUR10A1_LB1.indb 145
11.03.13 09:21
11.03.13 09:21