When using the lcd monitor – Epson PhotoPC L-410 User Manual

Page 12

Advertising
background image

12

Introduction

❏ The methods for using memory cards vary according to card type. Be sure to refer to the

documentation included with your memory card for details.

❏ Turn the camera off before installing or removing the memory card.

When using the LCD monitor

❏ The LCD monitor on this product may contain a few small bright or dark spots. These are

normal and do not mean that your LCD monitor is damaged in any way.

❏ If the LCD monitor on this product is damaged, consult your dealer.
❏ If the liquid crystal solution contained in the LCD monitor on this product leaks out and gets

onto your hands, wash them thoroughly with soap and water. If it gets into your eyes, flush
them immediately with water. If discomfort or vision problems remain after a thorough
flushing, see a doctor immediately.

❏ Only use a soft, dry cloth to clean the display. Do not use liquid or chemical cleaners.

When storing, maintaining, or transporting the L-410

❏ Do not store this product outdoors.
❏ Do not store this product near water.
❏ Do not store this product in a location subject to high temperature or humidity.
❏ Do not store this product in a location subject to rapid changes in temperature or humidity.
❏ Do not store this product in a location subject to direct sunlight or strong light sources.
❏ Unplug this product from the power outlet before cleaning it. Use a damp cloth for cleaning

and do not use liquid or aerosol cleaners.

Advertising