Epson PhotoPC L-410 - Manual (Page 82)

82 Maintenance and Troubleshooting
A communication error has
occurred. Either the cable has been disconnected or the power has been
turned off. Recheck that the cable is connected, turn the power
back on and try again.
XX images could not be
printed. If some of the images were taken with another camera or have been
changed by software, they may not print, only the images taken
with this camera will be printed. Use the actual camera or computer
that was used to create the images in order to print them.
Cannot print because the
necessary Frame file does not
exist or is corrupted. The picture cannot be printed because there is no frame file or the
link has been broken. Replace or add a frame linked to this file.
This function is not available. The printer does not support this function. You can try to clean it in
some other way, but the printer does not support the camera’s
function.
Parts inside your printer require
maintenance. The printer cannot print because components within the printer
need adjusting. Turn the printer off for a few seconds then turn the
power back on. If the error message still appears, consult the shop
you bought your printer from or Customer Support.
Error message Description