Precision Digital PD6060 - Manual (Page 97)

Model PD6060 Dual-Input Process Meter Instruction Manual
97
Display Parameter Action/Setting Description
display
channel C on the small display
Lit Hi Max on little
display Assign digital input to display max of
channel A on the small display
Lit HL Max/min little
display Assign digital input to toggle max/min of
channel A on the small display
LitHLC Max/Min little
display Assign digital input to toggle max/min of
channel C on the small display
Lit LC Min on little
display Assign digital input to display min of
channel C on the small display
Lit Lo Min on little
display Assign digital input to display min of
channel A on the small display
Little Little display
Press Enter to assign the small display
parameter (default: Ch-B)
locd
Locked
Enter password to unlock meter
Lt-CLr
Latching-
cleared
Set relay for latching operation with manual
reset only after alarm condition has cleared
mA 4-20 mA
Set meter for 4-20 mA input
mAn
Manual
Press Enter to manually control relays or
analog output operation
math
Math
Select channel C math function
mAx
Maximum
Program maximum mA output allowed
mbus Modbus Select to display Modbus input or to assign
Modbus input as the analog output source
menu Menu button Assign digital input to Menu button
min Minimum
Program minimum mA output allowed
No PtS
Num of points
Set meter for 2 to 32-point linearization
O Hold Relays output
hold Assign digital input or function keys to hold
all relay states
OFF
Off
Disable relay and front panel status LED,
turn relays off, program off time delay
OFF 1
Off 1
Set relay 1 Off time delay (1-8)
on
On
Enable fail-safe operation, turn relays on,
program on time delay
O-rang
Overrange
Program mA output for display overrange
Out 1 Output 1
Program output 1 value (e.g. 4.000 mA)
Out 2
Output 2
Program output 2 value (e.g. 20.000 mA)
pass
Password
Enter the Password menu
Pass 1 Password 1
Set or enter Password 1 (Allows use of the
F1–F3 function keys)
Pass 2 Password 2
Set or enter Password 2 (Allows use of the
F1–F3 function keys and changing the
set/reset points)
Pass 3
Password 3
Set or enter Password 3 (Restricts all
programming & F1–F3 keys)
prog
Program
Enter the Program menu