Rose Electronics CrystalView Pro Fiber - Manual (Page 14)

ON-SCREEN DISPLAY (OSD)
8
CRYSTALVIEW PRO FIBER
INSTALLATION AND OPERATIONS MANUAL
Device Control –OSD (PS/2 model only)
(See Appendix G for OSD access for the USB models)
The on-screen display provides an easy way to define the following
parameters:
1. Input select, graphic source, VGA of DVI
2. Scale mode
3. Brightness, contrast, and Back level
4. Colors
5. Color temperature
6. Color depth
7. Image, pixelclock, phase, screen position
8. Tools, Reset to factory defaults
9. Auto configuration
10. Save all settings
Access to the OSD features is performed from the remote unit by pressing
the Left Ctrl, Shift, and I key
( Initialize the On-Screen Display)
When the OSD is active, the keyboard LED will blink, the mouse is
inactive, and only the following keyboard keys are active.
Valid Key Function
Exit the OSD
Back to menu selection
Select submenu / Select parameter
Select previous position /
Decrease parameter value
Select next position /
Increase parameter value
Value bar is displayed to increase/decrease values
(Example - Contrast)