Rose Electronics CrystalView Pro Fiber - Manual (Page 33)

CRYSTALVIEW PRO FIBER
INSTALLATION AND OPERATIONS MANUAL
27
Appendix C. Firmware updates
The CrystalView Pro Fiber firmware may be updated when additional
enhancements and improvements are developed.
Contact Rose Electronics technical support for information on firmware
updates.
Appendix D. Rack mount instructions
The optional rack mount kit includes the following items:
 Two black anodized mounting brackets.
 Four 6 - 32 x 3/8” flat head mounting screws.
To rack mount your CrystalView Pro Fiber, attach the two rack mounting
brackets to your Unit with the short flange against the Unit using the four
screws provided. Do not over tighten the screws used to mount the Unit
to the mounting brackets. Use only the hardware provided, using
hardware other than that provided could cause damage to the electronics
and/or result in loss of mounting integrity. Secure the mounting brackets
to the rack using the appropriate size bolts, nuts and lock washers.
The following guidelines should be observed when installing.
a).
Do not exceed the operating temperature of 10
ο
C to 45
ο
C.
b). Do not block power supply vents or restrict airflow.
c). Mechanical loading of the rack should be considered to prevent
instability and possible tipping over.
d). Tighten all connectors securely and provide adequate strain relief for
all cables.
Appendix E. Rack mount illustration