Rose Electronics CrystalView Pro Fiber - Manual (Page 15)

CRYSTALVIEW PRO FIBER
INSTALLATION AND OPERATIONS MANUAL
9
OSD Menu descriptions
Menu descriptions
The input select menu is the first menu to display when the
OSD is activated. This menu allows you to select the graphic
source type. This is typically the video card type (VGA or DVI).
Use the left or right arrow key to select the video source (VGA or DVI) to
be used by the transmitter and press Enter. The actual video source will
be displayed with a check mark next to the source
Figure 4. Input Select Menu
The scale mode menu allows you to set a fixed resolution at the
receiver or use the resolution sent from the transmitter.
Figure 5. Scale mode menu