KEPCO TMA 4882-27 - Manual (Page 44)

3-18
TMA 4882-27 021910
FIGURE 3-5. EXPANSION OF QUESTIONABLE REGISTER FOR MULTIPLE LOGICAL INSTRUMENTS
3.6.9 SCPI PROGRAM EXAMPLE
Figure 3-6 is an example of a program using SCPI commands to program an MST Power Sup-
ply. The program illustrated is for a configuration using an IBM PC or compatible with a National
Instruments GPIB interface card. (It will be necessary to consult the manufacturer’s data to
achieve comparable functions with an interface card from a different manufacturer.) This pro-
gram sets output voltage (Voltage mode) or voltage limit (Current mode) to 5V, and current limit
(Voltage mode) or output current (Current mode) to 1A, then reads the measured (actual) volt-
age and current, then prints the measurements.