Caution – Amprobe DM-111S Current-Data-Logger User Manual
Page 6
DMIIIS
EN - 4
1.3.
DURING USE
Please read carefully:
CAUTION
Should you fail to keep to the prescribed instructions you could damage the
instrument and/or its components or endanger your safety.
When the instrument is connected to the circuit under test, do not touch any unused
terminal.
When measuring current, other currents located near the leads may affect the
measuring accuracy.
When measuring current, always position the wire in the very middle of the jaws in
order to obtain the highest accuracy.
A measured value remains constant if the "HOLD" function is active. Should you notice
that the measured value remains unchanged, disable the “HOLD” function.
1.4.
AFTER USE
After use, turn off the instrument by pressing ON/OFF for a few seconds.
If you will not be using the instrument for long periods of time use the storage
instructions described at paragraph 3.4.