Amprobe DM-111S Current-Data-Logger - Manual (Page 9)

DMIIIS
EN - 7
4. HOW TO OPERATE
4.1. INSTRUMENT: DESCRIPTION
ESC
F1 F2 F3 F4
HOLD
ENTER SAVE
MENU ESC
START
STOP
1
2
3
4
5
6
Legend:
1. Inputs for voltage and currents
2. RS232 serial output
3. Plug for external power supply
4. Display
5. Rotary switch
6. Keyboard
4.2. KEYBOARD: DESCRIPTION
The following keys are available.
 ON/OFF:
turning on
– turning off / Backlight ON (automatic Off after 5 sec.)
 F1, F2, F3, F4:
multifunction keys. The various functions are deducible from the
symbols shown on the bottom of the display.
 MENU: by pressing MENU it’s possible to check and modify the
recording parameters.
 ESC: to leave a menu or a sub-menu.
 ENTER/HOLD:
double function key:
 ENTER: to confirm the settings made
 HOLD: to block the value updating in real time in all the
screens. This function is disabled when recording
or measuring energy. When this function is
enabled it’s not possible to record or take an
energy measurement.
 SAVE: to save in the instrument memory a Record of “Smp” type (see
paragraph 5.4) containing the instantaneous values of voltage
and current present on the instrument inputs. This function is
disabled during a recording.
 START/STOP:
to start/stop manually a recording (see chapter 7).