Electro-Voice 1252 - Manual (Page 100)

Q LOG STATUS: Logging Statistics
An Overview of the Logs for the Primary
Meter.
The Number of Records and Memory Used
are listed for each log.
Q RESET: Meter Reset Commands.
WARNING! RESETS cause data to be lost.
Touch the window for the Reset you want to perform.
Don’t Reset changes to Reset.
Touch RESET NOW button. OK will appear.
Touch OK to refresh screen (go back to original
screen).
• Max/Min and Demand.
• Hour, I
2 T and V 2 T Counters.
• All Logs.
• TOU for Current Session and Month.
Q SETTINGS:
Q LCD SCREEN SETTINGS:
Contrast. Touch Up/Down buttons to
increase/decrease settings.
Number 37 is optimum setting.
Backlight Off Delay (number of seconds
after use that backlight turns off).
Touch Up/Down buttons to
increase/decrease settings.
Q NEXUS LINK SETTING:
Nexus Address (000 - 255).
Touch Up/Down buttons to
increase/decrease settings.
Protocol (selected).
Baud (selected).
Electro Industries/GaugeTech
Doc # E107706 V1.25
6-16