Mounting the nexus led external displays – Electro-Voice 1252 User Manual
Page 41
Electro Industries/GaugeTech
Doc # E107706 V1.25
3-3
3.2: Mounting the Nexus LED External Displays
Q
The Nexus 1250/1252 LED Displays, Model # P40N, P41N and P43N, mount using a standard
ANSI C39.1 drill plan.
Q
Secure the four mounting studs to the back of the panel with the supplied nuts.
Q
Six feet of RS-485 communication/power cable harness is supplied. Allow for at least a 1.25-inch
(3.17cm) diameter hole in the back for the cable harness. See Chapter 5 for communication and
power supply details.
Q
The cable harness brings power to the display from the Nexus 1250/1252 Meter, which supplies
15–20V DC. The P40N (or P41N or P43N) can draw up to 500 mA in display test mode.
Figure 3.3: Nexus P40N LED External Display Mounting Diagrams
Nexus P40N Display, Front View
Nexus P40N Display, Side View
+
3.38” (8.58cm) Sq
.
1.687” (14.28cm)
4 X 0.198” (5.02mm)
4.00” (10.16cm)
4.38”Sq.
(11.12cm)
1.438”
(3.65cm)
.75” (19.05mm)
ANSI C39.1 Drill Plan