PLANET IPX-2100 - Manual (Page 15)

Internet Telephony PBX System
IPX-2100
LED definitions
15
1 12V DC 12V DC Power input outlet
2 Reset
The reset button, when pressed, resets the IP PBX without the
need to unplug the power cord.
3 ETH
The ETH port supports auto negotiating Fast Ethernet 10/100
Base-TX networks. This port allows your IP PBX to be connected to
an Internet Access device, e.g., router, cable modem and ADSL
modem through a CAT.5 twisted pair Ethernet cable.
4 FXO Port Connect to PSTN or PBX SLT line with RJ-11(Write) analog line.
5 FXS Port
Connect to PBX CO or single line telephone with RJ-11(Write)
analog line.
Button Action Description
Press less than 6 secs
System reboot.
Reset
Press over 6 secs Reset to Factory Default
Please be reminded to reset to factory default. Uploaded music setting (on hold
music) and backup file will not be removed.
Front Panel LED State Description
PWR
Steady Green
Off
PBX Power ON
PBX Power OFF
SYS
Blinking Green
Off
System is working
System is off
ETH
Blinking Green
Off
PBX network connection established
Waiting for network connection
FXO
Steady Red
Flashing
Off
Ready / Standby
Ringing
Module not available
FXS
Steady Green
Flashing
Off
Ready / Standby
Ringing
Module not available
USB Void Future Feature