PLANET UMG-1000 - Manual (Page 70)

70
12.5 Port Forwarding
To control forward some special internet request from WAN to LAN, the administrator can
set the port forwarding rules in the page “Port Forwarding”. The specific internet request
can forward from WAN to LAN.
SERVICE PORT forward
This section allows for the setting of port forward rules.
Service Name: Specifies the service to forward.
Service Type: Specifies the service type. It can be the system defined or user
defined.
Protocol: Specifies the network protocol that the rule will apply to if you select
“user defined” as the service type.
Extension Start Port: Specifies the start port that the rule will apply to if you
select “user defined” as the service type.
Extension End Port: Specifies the end port that the rule will apply to if you
select “user defined” as the service type.
Server IP Address: If you want to apply the rule to a special IP address, check
this option.
DELETING SERVICES FROM THE port forward LIST
Check the “Delete” check box of the corresponding service and click the “Delete” button to
delete the service from the port forward list. The firewall will not forward this service any
more.