ProSoft Technology RLX2-IFH9E - Manual (Page 112)

Dialog Boxes ControlScape ♦ RadioLinx
User Manual RadioLinx® ControlScape FH
Page 112 of 132 ProSoft Technology, Inc.
March 16, 2011
8.27 Radio IP Settings Dialog Box
The Radio IP Settings dialog box opens when you click the IP Settings button ont
he Radio Discovery Tool dialog box. Use this dialog box to view or modify the IP
Settings for the selected radio.

Radio Name: The name assigned to the radio. in the Radio Configuration
Dialog Box (page 81).

MAC Address: The unique hexadecimal number that identifies the radio.

Subnet Mask: This defines the network ID and is typically set to
255.255.255.0. All Ethernet devices on a particular network should have the
Subnet Mask set to the same value.

Default Gateway: This defines the default network that the Configuration PC
will operate on. The gateway is the computer that routes the traffic from a
workstation to the outside network.

IP Address: Enter the IP address for the radio in this field. This is the radio’s
identifier on the network. Each radio must have its own unique address to be
able to communicate to the master on the network. This address must be
different from any other device on the network including the Configuration
PC.

Unused IPs: This window shows a list of unassigned IP addresses currently
available on the network. Click to select an IP address to assign to the
selected radio.

Find More: Click this button to rescan the network to find additional
unassigned IP addresses.