ProSoft Technology RLX2-IFH9E - Manual (Page 121)

ControlScape ♦ RadioLinx Dialog Boxes
RadioLinx® ControlScape FH User Manual
ProSoft Technology, Inc. Page 121 of 132
March 16, 2011
8.36 Set a Radio IP Address Dialog Box
The Set a Radio IP Address Dialog Box opens when you click the Add button on
the Edit BootP Table dialog box (page 101). Use this dialog box to assign an IP
address to a new radio.

Radio Serial Number: Type the serial number for the radio in this field.

IP Address: Enter the IP address for the radio in this field. This is the radio’s
identifier on the network. Each radio must have its own unique address to be
able to communicate to the master on the network. This address must be
different from any other device on the network including the Configuration
PC.

OK: Click the OK button to save your selection and close the dialog box.

Cancel: Click the Cancel button to close the dialog box and discard your
changes.