ProSoft Technology RLX2-IFH9E - Manual (Page 17)

ControlScape ♦ RadioLinx Network Configuration
RadioLinx® ControlScape FH User Manual
ProSoft Technology, Inc. Page 17 of 132
March 16, 2011
3.2 Set Radio Color
While the color of radio icons does not affect a network's function, some
applications may be more clearly represented with color-coded radios. Radio
color can be set for the entire network or for individual radios.
Note: If radio colors other than the default color are to be assigned, they must be assigned first,
before the overall network or individual radios are configured. This is the only time a global
network color may be picked, before the network is first configured. Unique colors for individual
radios may be selected when individual radios are later added to existing Point-Multipoint networks
of either variety.
To set color for the entire network, select the following from the RadioLinx
ControlScape FH Setup/Diagnostic Application Main Menu:

Utilities
o
Set Radio Color
The Radio Color dialog box appears (as shown here):
Select the radio color to be initially used by the entire network (individual radios
with unique colors may be added later to existing Point-Multipoint networks of
either variety) and click OK or press [Enter]. With this action, the dialog box goes
away and the focus is returned to the Main Menu. Then, from the Main Menu:

Configure
o
New Network