ProSoft Technology RLX2-IFH9E - Manual (Page 122)

Dialog Boxes ControlScape ♦ RadioLinx
User Manual RadioLinx® ControlScape FH
Page 122 of 132 ProSoft Technology, Inc.
March 16, 2011
8.37 Set the Radio IP Address Dialog Box
The Set the Radio IP Address Dialog Box opens when you select a radio, and
then click the Edit button on the Edit BootP Table Dialog Box (page 101). Use
this dialog box to change the IP address for an existing radio.

Radio Serial Number: This is the serial number of the radio. This field is for
information only, and cannot be modified.

IP Address: Enter the IP address for the radio in this field. This is the radio’s
identifier on the network. Each radio must have its own unique address to be
able to communicate to the master on the network. This address must be
different from any other device on the network including the Configuration
PC.

OK: Click the OK button to save your selection and close the dialog box.

Cancel: Click the Cancel button to close the dialog box and discard your
changes.