ProSoft Technology RLX2-IFH9E User Manual
Page 43
Advertising
ControlScape ♦ RadioLinx
Radio Configuration
RadioLinx® ControlScape FH
User Manual
ProSoft Technology, Inc.
Page 43 of 132
March 16, 2011
4.3
When to Re-Configure Radios
All radios need to be configured before initial installation in a network. In general,
after radios are functioning in a network, they do not need to be re-configured if
the network changes. The program will instruct when the radios need to be
configured, as illustrated below:
After all the radios are configured, the graphical layout will be displayed as
follows:
Advertising
This manual is related to the following products: