Rear panel controls and functions – Samson Graphite 49 - USB/MIDI Keyboard Controller User Manual
Page 11
11
Graphite 49 · USB/MIDI Keyboard Controller
EN
GL
ISH
FRANÇAIS
DEUTSCHE
ESP
AÑOL
IT
ALIANO
1
2
3
4
5
Rear Panel Controls and Functions
1.
POWER Switch - Use this switch to turn the keyboard on or off.
2.
DC IN - The Graphite 49 can be powered using a 9V 300mA adaptor, connected to the
DC IN jack.
3.
USB Connection - Connect a standard USB cable from this port to the USB connection
on a computer or iPad to provide power to the keyboard, as well as to send and receive
MIDI data.
4.
MIDI OUT - Use a 5-pin MIDI cable to connect the Graphite 49 to an external MIDI
device.
5.
SUSTAIN Pedal Input - Connect a 1/4” sustain pedal to this input. This input is preset
from the factory to send MIDI sustain (CC #64) messages. The SUSTAIN pedal input
can be assigned to send different MIDI parameters in Setup Mode.