Samson Graphite 49 - USB/MIDI Keyboard Controller - Manual (Page 14)

14
Display Features
Pad.Vel: Number of the pad velocity (touch response) curve. The range is 0–9.
Status Indicators
Local: This sign will appear when the Local function is engaged.
Mute: This sign will appear when the Mute function is engaged.
Drawbar: This sign will appear when the polarity of the slider is inverted and engaged.
Reset: This sign will appear when the Preset Reset function is executed.
Button Indicators
F1–F16: When a function button is at On status, the corresponding block will appear.
A/B: Indicates the active pad bank
Trigger Pads: When a pad is pressed, the corresponding block will appear.
Transport Controls: When a transport button is on, the corresponding block will appear.
Note: Port, Ch, Mode, Type and Val are settings of a component. When a component is
activated, the component name, operation data and setting information will be shown. If more
than one component is activated at the same time, the display shows the information of the
component that was most recently activated.