Sony ECM-M1 Compact Camera-Mount Digital Shotgun Microphone - Manual (Page 26)

You can screw the mini-stand to a tripod through the screw hole on the mini-stand.
Use a tripod with the screw that is shorter than 5.5 mm (7/32 in.) in length. To a tripod with the longer screw, you cannot secure the mini-stand firmly with
the screw, resulting in possible damage to the mini-stand.
Note
When you do not intend to use the flash unit, be sure to attach the terminal protection cap back to the Multi Interface foot.
HVL-F60RM2/HVL-F46RM: While rotating the lock lever toward “LOCK,” you may feel resistance at some point. Keep rotating the lever in such a case as
well until the flash unit is secured on the mini-stand.
4-735-263-12(1) Copyright 2018 Sony Corporation
26