Sony ECM-M1 Compact Camera-Mount Digital Shotgun Microphone - Manual (Page 70)

Help Guide
Flash
HVL-F60RM/HVL-F60RM2/HVL-F46RM
Using the bounce adaptor (HVL-F60RM/HVL-F60RM2)
With the supplied bounce adaptor attached to the flashlamp for bounce flash photography, you can diffuse the light from the flash unit over a
wider range, producing a softer light and reducing shadows.
To attach the bounce adaptor
Notes on attaching the bounce adaptor
As illustrated below, hold the bounce adaptor with its elongated part fit over the flashlamp top, make sure its orientation with the flashlamp is
right, and then push in the adaptor all the way. Insufficient attachment may prevent accurate compensation.
To remove the bounce adaptor
While pulling the tab on the bounce adaptor in the direction of the arrow ( ), pull out the bounce adaptor in the direction of the arrow ( ).
4-735-263-12(1) Copyright 2018 Sony Corporation
Align the tabs on the bounce adaptor with the grooves on the flash unit and push in the bounce adaptor in the direction of the
arrow.
When the bounce adaptor is properly attached, is displayed on the LCD panel.
1
70