Sony ECM-M1 Compact Camera-Mount Digital Shotgun Microphone User Manual
Page 63
Flash
HVL-F60RM/HVL-F60RM2/HVL-F46RM
Selecting the flash coverage automatically <auto zoom>
This flash unit automatically selects the appropriate flash coverage for the focal length of the lens on the attached camera within the range
from 20 mm to 200 mm (HVL-F60RM/HVL-F60RM2) or the range from 24 mm to 105 mm (HVL-F46RM) (auto zoom). You do not need to
manually select the flash coverage most of the time.
Flash distribution setting
You can specify the flash distribution pattern by selecting [FLASH DISTRIBUT.] on the MENU screen. The flash distribution setting is applied to
the flash coverage whether it is selected automatically or manually.
STD:
Flash coverage with standard flash distribution
CENTER:
Flash coverage with priority given to guide numbers
Press the Fn button, select [ZOOM] on the Quick Navi screen, and then select [AUTO].
When [AUTO] is displayed as the flash coverage (zoom) setting on the LCD panel, the auto zoom function is enabled.
If you use a lens with the focal length of less than 20 mm (in combination with HVL-F60RM/HVL-F60RM2) or 24 mm (in combination with
HVL-F46RM) while the auto zoom function is enabled, [WIDE] will blink on the LCD panel.
In such a case, proceed to the rest of the steps.
1
Gently pull out the wide panel along with the bounce sheet and fold down the wide panel to cover the flashlamp.
2
Push the bounce sheet back into the flash unit.
[WIDE] is displayed on the LCD panel.
3
63