Sony ECM-M1 Compact Camera-Mount Digital Shotgun Microphone - Manual (Page 34)

To establish a pairing with 2 or more devices
Set each device to be paired with this flash unit as the receiver unit and repeat steps 3 and 4.
When you are finished with pairing with all receiver units, select [EXIT] on the commander unit, and then [OK] on the following screen.
Hint
HVL-F60RM:
This flash unit is capable of using 2 types of wireless communications for wireless flash photography: radio and optical wireless communications. You can
select the wireless type by selecting [
/ SELECT] on the MENU screen.
You can pair the flash unit with up to 15 receiver units.
You can view or delete the paired receiver unit(s) by selecting [PAIRED DEVICE] on the MENU screen.
Note
The above instructions are given based on the assumption that this flash unit uses default radio wireless communications.
When you have changed the setting of the commander unit and specified it as a receiver unit, or vice versa, be sure to reestablish paring among the units.
Related Topic
Configuring the flash unit for radio wireless flash photography
Wireless flash photography <with the receiver unit>
4-735-263-12(1) Copyright 2018 Sony Corporation
Select [OK] to establish pairing.
On the commander unit, the following screen is displayed.
Pairing is established. On the commander unit, you can continue pairing with other receiver units. Every time pairing is established with a
receiver unit, the number of paired devices (
) increases.
On the receiver unit, the following screen is displayed.
The pairing is established.
When the pairing is established, the LINK lamp lights in green.
4
34