Sony ECM-M1 Compact Camera-Mount Digital Shotgun Microphone User Manual
Page 49
Flash
HVL-F60RM/HVL-F60RM2/HVL-F46RM
Multiple radio wireless flash photography with flash power level ratio control
You can perform wireless flash photography while controlling the lighting ratio among a maximum of 3 wireless groups (A, B, and C) of flash
units including the commander unit. Before you perform multiple wireless flash photography, be sure to specify the flash unit as the
commander unit or the receiver unit.
Commander unit: HVL-F60RM/HVL-F60RM2/HVL-F46RM or a radio wireless commander
Receiver unit (off-camera flash unit): HVL-F60RM/HVL-F60RM2/HVL-F46RM or a radio wireless receiver
: Commander unit (CMD)
: Wireless receiver
: Receiver unit (RCV)
Hint
The commander unit fires as a member of the wireless group A. If you do not want the commander unit to fire, select
(CMD flash setting) on the Quick
Navi screen and select [OFF].
Related Topic
Pairing with a radio wireless commander/receiver <for radio wireless flash photography>
4-735-263-12(1) Copyright 2018 Sony Corporation
Press the Fn button on the commander unit, select [RATIO CONTROL] on the Quick Navi screen, and then select [ON].
1
Press the Fn button on the commander unit, select the wireless group (A/B/C) for which you want to change the flash power
level ratio on the Quick Navi screen, and then specify the ratio.
As shown above, when the flash power level ratio for TTL flash photography is displayed as [4:2:1] on the LCD panel, the flash unit in
each group fires with a fraction of the total flash power: 4/7, 2/7, and 1/7, respectively.
2
49