BenQ MOBIUZ EX270QM 27" 1440p HDR 240 Hz Gaming Monitor - Manual (Page 19)

19
How to assemble your monitor hardware
• If the computer is turned on you must turn it off before continuing.
Do not plug-in or turn-on the power to the monitor until instructed to do so.
• The following illustrations are for your reference only. Available input and output jacks may vary depending on the
purchased model.
• Avoid finger pressure on the screen surface.
1. Attach the monitor base.
Please be careful to prevent damage to the monitor. Placing the screen surface on an object like a stapler or a mouse
will crack the glass or damage the LCD substrate voiding your warranty. Sliding or scraping the monitor around on
your desk will scratch or damage the monitor surround and controls.
Protect the monitor and screen by clearing a flat open area
on your desk and placing a soft item like the monitor
packaging bag on the desk for padding.
Gently lay the screen face down on a flat clean padded
surface.
Attach the monitor stand to the monitor base as illustrated
until it locks in place. Raise the thumbscrew lid and tighten
the thumbscrew as illustrated. Then push the lid back.
Orient and align the stand arm with the monitor, then push
them together until they click and lock into place.
1
2
1
2