BenQ MOBIUZ EX270QM 27" 1440p HDR 240 Hz Gaming Monitor - Manual (Page 25)

25
Using the monitor wall mounting kit (purchased separately)
The back of your LCD monitor has a VESA standard mount with 100mm pattern, allowing the installation
of a wall mount bracket. Before starting to install a monitor wall mounting kit, please read the
precautions carefully.
Precautions
• Install your monitor and monitor mounting kit on a wall with flat surface.
• Ensure that the wall material and the standard wall mount bracket (purchased separately) are stable
enough to support the weight of the monitor. Refer to the product specifications on the website for
weight information.
• Turn off the monitor and the power before disconnecting the cables from the LCD monitor.
1. Remove the monitor stand.
Lay the screen face down on a clean and well-padded
surface. Detach the monitor stand as instructed in step 1~2
in
How to detach the stand and the base on page 24 .
2. Remove the screws on the back cover.
Use a cross-pointed screwdriver to release the screws on
the back cover. The use of a magnetic-head screwdriver is
recommended to avoid of losing the screws.
3. Follow the instruction manuals of the wall mount bracket you purchased to complete
the installation.
Use four M4 x 10 mm screws to fix a VESA standard wall mount bracket to the monitor. Make sure that all screws are
tightened and secured properly. Consult a professional technician or BenQ service for wall mount installation and
safety precautions.