Care and cleaning, Servicing – BenQ MOBIUZ EX270QM 27" 1440p HDR 240 Hz Gaming Monitor User Manual

Page 8

Advertising
background image

8

• Always ensure that the batteries are inserted with the positive and negative terminals in the correct

direction as shown in the battery compartment.

• Different types of batteries have different characteristics. Do not mix different types.
• Do not mix old and new batteries. Mixing old and new batteries will shorten battery life or cause

chemical leaks from the old batteries.

• When batteries fail to function, replace them immediately.
• Chemicals which leak from batteries may cause skin irritation. If any chemical matter seeps out of the

batteries, wipe it up immediately using a dry cloth, and replace the batteries as soon as possible.

• Due to varying storage conditions, the battery life for the batteries included with your product may be

shortened. Replace them within 3 months or as soon as you can after initial use.

• There may be local restrictions on the disposal or recycling of batteries. Consult your local regulations

or waste disposal provider.

If the supplied remote control contains a coin / button cell battery, pay attention to the following notice

as well.
• Do not ingest battery. Chemical Burn Hazard.
• The remote control supplied with this product contains a coin / button cell battery. If the coin / button

cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.

• Keep new and used batteries away from children. If the battery compartment does not close securely,

stop using the product and keep it away from children.

• If you think batteries might have been swallowed or placed inside any part of the body, seek immediate

medical attention.

Care and cleaning

• Do not place the monitor face down on the floor or a desk surface directly. Otherwise, scratches on

the panel surface may occur.

• The equipment is to be secured to the building structure before operation.
• (For models that support wall or ceiling mounting)

• Install your monitor and monitor mounting kit on a wall with flat surface.
• Ensure that the wall material and the standard wall mount bracket (purchased separately) are stable enough

to support the weight of the monitor.

• Turn off the monitor and the power before disconnecting the cables from the LCD monitor.

• Always unplug the product from the power outlet before cleaning. Clean the LCD monitor surface with

a lint-free, non-abrasive cloth. Avoid using any liquid, aerosol or glass cleaners.

• Slots and openings on the back or top of the cabinet are for ventilation. They must not be blocked or

covered. Your monitor should never be placed near or over a radiator or heat sources, or in a built-in

installation unless proper ventilation is provided.

• Do not place heavy loads on the monitor to avoid possible personal injury or damage to the monitor.
• Consider keeping the box and packaging in storage for use in the future when you may need to

transport the monitor.

• Refer to the product label for information on power rating, manufacture date, and identification

markings.

Servicing

• Do not attempt to service this product yourself, as opening or removing covers may expose you to

dangerous voltages or other risks. If any of the above mentioned misuse or other accident such as

dropping or mishandling occurs, contact qualified service personnel for servicing.

Advertising