BenQ MOBIUZ EX270QM 27" 1440p HDR 240 Hz Gaming Monitor - Manual (Page 6)

6
Safety precautions
Power safety
• The AC plug isolates this equipment from the AC supply.
• The power supply cord serves as a power disconnect device for pluggable equipment. The socket outlet
should be installed near the equipment and be easily accessible.
• This product should be operated from the type of power indicated on the marked label. If you are not
sure of the type of power available, consult your dealer or local power company.
• The Class I pluggable equipment Type A must be connected to protective earth.
• An approved power cord greater or equal to H03VV-F or H05VV-F, 2G or 3G, 0.75mm
2
must be used.
• Use only the power cord provided by BenQ. Never use a power cord that appears to be damaged or
frayed.
• To avoid possible damage to the monitor, do not use it in a region where power supply is unstable.
• Ensure that the power cord is connected to a grounded power outlet before turning on the monitor.
• To avoid possible danger, observe the total electric load when using the monitor with a (multi-outlet)
extension cord.
• Always turn off the monitor before unplugging the power cord.
For Germany only:
• (If the weight of the product is less than or equal to 3 kg) An approved power cord greater or equal to
H03VV-F, 3G, 0.75mm
2
must be used.
• (If the weight of the product is more than 3 kg) An approved power cord greater or equal to H05VV-F
or H05RR-F, 3G, 0.75mm
2
must be used.
• (If a remote control is provided) RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
For models with adapter:
• Use only the power adapter supplied with your LCD Monitor. Use of another type of power adapter
will result in malfunction and/or danger.
• Allow adequate ventilation around the adapter when using it to operate the device or charge the
battery. Do not cover the power adapter with paper or other objects that will reduce cooling. Do not
use the power adapter while it is inside a carrying case.
• Connect the power adapter to a proper power source.
• Do not attempt to service the power adapter. There are no service parts inside. Replace the unit if it is
damaged or exposed to excess moisture.
Installation
• Do not use your monitor under any of the following environmental conditions:
• Extremely high or low temperature, or in direct sunlight
• Dusty places
Please follow these safety instructions for best performance, and long life for your monitor.
10-90% 0-3000m 0-40°C 10-60% 0-12000m -20-60°C