BenQ PD2725U DesignVue Designer 27" 16:9 HDR 4K IPS Monitor User Manual
Page 21
21
Getting to know your monitor
Power delivery of USB-C™ ports on your monitor (PD3420Q only)
With the power delivery function, your monitor helps supply power to the connected
USB-C™ devices. Available power varies by port. Make sure the devices are connected to the
appropriate ports to be activated properly with sufficient power.
• A connected device needs to be equipped with a USB-C™ connector that supports charging
function via USB power delivery.
• The connected device can be charged via USB-C™ port even when the monitor is in power
saving mode.(*)
• The USB power delivery is up to 65W. If the connected device requires more than 65W for
operation or for boot up (when the battery is drained), use the original power adapter that
came with the device.
• The information is based on the standard testing criteria and is provided for reference. The
compatibility is not guaranteed as the user environments vary. If a separately purchased
USB-C™ cable is used, make sure the cable is certified by USB-IF and is full-featured, with
power delivery and video / audio / data transfer functions.
PD3420Q
USB-C™ 65W
(on the rear of the monitor)
USB-C™
(on the left side of the monitor)
5V / 3A
5V / 1.5A
9V / 3A
N/A
12V / 3A
N/A
15V / 3A
N/A
20V / 3.25A
N/A
*: Charging via USB-C™ in monitor power saving mode is available when the
USB-C Awake
function is
enabled. Go to
System
>
USB-C Awake
and select
ON
.