BenQ PD2725U DesignVue Designer 27" 16:9 HDR 4K IPS Monitor - Manual (Page 22)

22 How to assemble your monitor hardware
How to assemble your monitor hardware
• If the computer is turned on you must turn it off before continuing.
Do not plug-in or turn-on the power to the monitor until instructed to do so.
• The following illustrations are for your reference only. The location and available input and output jacks may
vary depending on the purchased model.
Avoid finger pressure on the screen surface.
1. Attach the monitor base. (PD3420Q)
Please be careful to prevent damage to the monitor. Placing the screen surface on an object like a stapler or a
mouse will crack the glass or damage the LCD substrate voiding your warranty. Sliding or scraping the monitor
around on your desk will scratch or damage the monitor surround and controls.
While the monitor is still inside the box, remove the
cushion that protects the back of the monitor.
Remove the foam wrap from the monitor stand and
base. Attach the monitor stand to the monitor base as
illustrated.
Raise the thumbscrew lid and tighten the thumbscrew
as illustrated. Then push the lid back.
2
1