Kinefinity MAVO Edge 8K Digital Cinema Camera - Manual (Page 11)

MAVO Edge 8K Operation Manual (KineOS 7.0)
©2021 Kinefinity Inc. Page 11 / 61
2. QUICK GUIDE
2.1 Power Supply
The MAVO Edge 8K allows different types of power supply:
 PD KineBAT 150 (Compatible with V-mount batteries) fits Edge V-Mount hybrid battery plate on the
back. Single PD KineBAT 150 can power the camera for more than 3 hours.
 GripBAT 4S (Compatible with BP-U30) can be installed on the BP-U compartment on the back of
MAVO Edge 8K. With a higher capacity up to 52Wh, the GripBAT 4S still enables a power supply
about 60 mins even mounting KineMON-5U monitor on the camera.
 GripBAT 2S: Due to specialized UPS power contacts at the bottom of the
camera, MAVO Edge 8K can be constantly powered by two NP-F550
batteries with the UPS Baseplate designed by Movcam. (Recommend
using GripBAT 2S as its capacity is 75% higher than regular 2000mAh
batteries in the market. It has high working current with long battery
time.) No need to turn off the camera when replacing the battery.
 Power Cords: Connect different power cords to the 2-pin DC IN port
of the camera body:
1. VDD
2. Ground
DC IN Definition