Kinefinity MAVO Edge 8K Digital Cinema Camera - Manual (Page 18)

MAVO Edge 8K Operation Manual (KineOS 7.0)
©2021 Kinefinity Inc. Page 18 / 61
Function of Buttons on KineEVF
 Button 1:
 Peaking focus: Press Button 1, to show peaking with red line or not, assist cameraman on image
focus;
 Peaking focus sensitivity: Press Button 1 for three seconds to enable setting of sensitivity of
peaking function.
 Button 2:
 RGB Histogram on input video: Press Button 2, to show histogram at the left corner of screen;
 False color on input video: Press Button 2 for three seconds to show false color which IRE
based on Arri False Color scale.
 PowerButton: Push up or down Power button at the side to turn on or off the monitor quickly. There is
also an LED indicator for status of monitor.
 Wheel:
 Tuning brightness of KineEVF. Press Wheel, then rotate the wheel, it will change brightness of
KineEVF at 10% step while 60% brightness in default;
 Proximity Sensor, on/off. Press Wheel for three seconds.
 Diopter ring. Set from -6D to +2D based on military spec (from 600 degrees of myopia to 200 degrees of
hyperopia).