Kinefinity MAVO Edge 8K Digital Cinema Camera - Manual (Page 41)

MAVO Edge 8K Operation Manual (KineOS 7.0)
©2021 Kinefinity Inc. Page 41 / 61
3.10 Kinefinity App Instruction
Kinefinity App which is re-designed thoroughly works with MAVO Edge 8K. The App can tune the shooting
parameters or get the status of cinema cameras responsively. The brilliant thing is that the App displays the
video stream from cameras in real time with super low latency, if the iOS devices and camera work in stable
and good WIFI environment
Preparation before running Kinefinity APP:
1. Make sure a high-gain dual-band internal-pin Wi-Fi antenna is mounted to the camera (The WIFI port
is manufactured with internal-pin and internal-bore; the antenna is SMA male pin and female head
with 5dBi and supports WIFI frequency band);
2. The cinema camera works as WIFI Client mode, so it needs an external wireless AP (access point),
which could be Android or iPhone12 hotspot (do not recommend iPhone 11 or below as hotspot for
this application) or wireless router, dual band preferred.
Take Android hotspot and iPad with Kinefinity App as the example:
1. Set the camera:
[MENU  Network  WIFI: on and Stream: on]
2. Prepare WIFI QR code: Generate the code by QR Code Generation website or WIFI hotspot code by
Android Phone;
3. iPad access to WIFI: Set iPad WIFI or use iOS camera to recognize the WIFI code to access to the
WIFI;
4. Camera access to WIFI by scanning the QR code:
[MENU  Network  Connect to Newwork…]