Kinefinity MAVO Edge 8K Digital Cinema Camera - Manual (Page 20)

MAVO Edge 8K Operation Manual (KineOS 7.0)
©2021 Kinefinity Inc. Page 20 / 61
2.5.2 The Use of KineMAG Nano
The use of KineMAG Nano is very simple. Open the SSD door and insert the KineMAG Nano 1TB SSD into the
A or B card slot before powering on the camera; you can also insert two SSD cards at the same time. The SSD
card slot is equipped with a built-in magnet door. Above the SSD card slot is the SSD function button, which
has the function of managing the SSDs in the A and B slots; on the right side of the card slot are two SSD
indicator lights for the upper slot A and lower slot B, which indicate the status of the SSD in the slot.
Status of SSD indicator (A, B):
  Red: KineMAG Nano in the slot is recording/playing the clip;
 
Green: KineMAG Nano in the slot is selected;
  Orange: KineMAG Nano in the slot is not selected;
  Grey: KineMAG Nano is not in the slot.
The monitor screen will show the SSD status:
 Yellow [STBY] : The SSD indicator is off, which means that there is no SSD in the slot, so the camera
cannot record. Insert the SSD and reboot the camera;
 Yellow [STBY] : The SSD indicator is yellow, which means there is an SSD in the card slot but it is not
displayed on the screen. The file system might be incorrect or the card data is faulty, you still can't
shoot under this status. Please follow the following steps:
 The first step: Ensure the data security of the card;
 The second step: Format the SSD by [MENU  Shoot  Format SSD]. After the SSD formatting is
completed, the camera will automatically detect the SSD. Then, the SSD will display the remaining
time, roll number and footage serial number of the selected card A/B.
 Green [STBY] : The SSD will display the remaining time and roll number of the selected card A/B. At
this time, the SSD indicator of the relevant card is green, and you can shoot and the footage will be
stored in the SSD.
 Red [

REC] : The camera is recording. The indicator of the selected card A/B card is red at this time.
CAUTION Data can't be recovered after the SSD is rebuilt/formatted; please backup all data before
formatting. Before confirm the operation, please check the SSD you format is SSD A or SSD B.
NOTICE Please insert the SSD before the camera is powered on, or the SSD will not be detected.
NOTICE We only recommend KineMAG Nano. The performances of a 3 rd -party SSD are not guaranteed.
We cannot provide technical support or help on recording issues such as frame drop or data loss
for 3 rd -party SSD.
NOTICE Please prepare backup SSD cards in case of emergency on set.