Kinefinity MAVO Edge 8K Digital Cinema Camera - Manual (Page 33)

MAVO Edge 8K Operation Manual (KineOS 7.0)
©2021 Kinefinity Inc. Page 33 / 61
3.5 Firmware Update
Kinefinity always optimizes the current features and adds new functions to
the cameras by firmware update. Users can download the latest firmware
from Kinefinity website to get their cameras updated.
The firmware version is shown at the bottom of MENU, for example,
firmware: KineOS V7.0(00), means the KineOS version is 7.0 with a building
number of 7000. To upgrade the firmware as the following steps:
1. Download : Download and copy the latest firmware to the root folder
of a FAT32 USB disk; insert the USB-C disk into the USB-C socket of the
camera;
2. Update : Choose Update Firmware in the System menu, and then
confirm to updade. When the successful message appears on the
display, it means the update is completed (approx. 30 mins);
3. Reboot : Power down the camera, and remove the USB-C disk. Repower
the camera, then the new firmware will take effect.
Downgrading the firmware to the previous version is also available to perform,
which is identical to the steps of firmware update.
CAUTION Do NOT take any other operation and never lose power firmware
update, else it may lead to failure of the update, and the camera
has to be sent to Kinefinity for repair, or you can to update the
firmware under calibration mode, please refer to 3.6.2.
CAUTION Remove any lenses before updating the firmware.
NOTICE Before updating the firmware, the user settings can be exported
from the camera. After the update is done, the user settings can
be imported to the camera by:
[MENU  System  Export/Import User Settings]
Menu Operation
Update Firmware
[MENU  System  Update
Firmware]