Kinefinity MAVO Edge 8K Digital Cinema Camera - Manual (Page 23)

MAVO Edge 8K Operation Manual (KineOS 7.0)
©2021 Kinefinity Inc. Page 23 / 61
2.8 Playback
To enter the playback mode, you can press and hold the [Playback] button for one sec in Live View mode,
and then you are able to trigger play/pause of the current clip by pressing the [Playback] button again.
Loop playback
The way to play a clip in a loop is to set by [MENU  Playback  Clip End: Loop]. Playback continues from the
beginning of the same clip again in accordance with project fps.
Clip switching
Press the shortcut button [1] to switch to the previous clip; press shortcut button [2] to switch to the next
clip. Fast forward and fast reverse are available by the wheel. Please note the parameters in Playback mode
are different from the ones in Live View Mode.
Playback speed
To change the playback speed in the menu, press [MENU  Playback  Playback at: ×1]. There are seven
speed choices: Ч1/4, Ч1/2, Ч1, Ч2, Ч4, Ч8, Ч16.
Switch back to Live View mode
Press [REC] button or press and hold [Playback] button for one sec to switch back to Live View mode.