Kinefinity MAVO Edge 8K Digital Cinema Camera - Manual (Page 13)

MAVO Edge 8K Operation Manual (KineOS 7.0)
©2021 Kinefinity Inc. Page 13 / 61
2.2 Mount
MAVO Edge 8K comes with a native KineMOUNT, which needs a mounting adapter to attach a lens to the
camera. The available adapters include EF Mounting Adapter, EF Mounting Adapter with KineEnhancer, PL
Mounting Adapter, SONY E Mounting Adapter, and also ARRI LPL Mounting Adapter.
There are only three steps to install mounting adapters to the KineMOUNT. Here we take EF adapter as an
example. Turn off the camera and then:
1. Release : Keep pressing the KineMOUNT Release Button and rotate the locking ring of the
KineMOUNT counter-clockwise, then take off the KineMOUNT cover;
2. Install : There is a positioning slot above the electronic contacts of the KineMOUNT, please align the
arcuate protrusion on the adapter with the locating slot of KineMOUNT when attaching the mounting
adapter to the camera;
3. Lock : Rotate the locking ring of KineMOUNT clockwise to fasten the adapter to KineMOUNT firmly.
Power on the camera after the adapter is mounted. Press [MENU] button and check the bottom of the menu.
If it presents EF sys 9 (Or a different number), that means you have mounted the adapter successfully.
CAUTION Power off camera when swapping different adapters, else camera or adapters may get burned.
CAUTION As the FFD of KineMOUNT is very short, please don't try to attach any lens directly to
KineMOUNT, except lenses tailored for KineMOUNT, or it will cause permanent damage
to CMOS imaging sensor and OLPF.
NOTICE When installing the EF Mounting Adapter with KineEnhancer, please don't touch the optical
glass. Any damage to the glass is irreversible, and the glass has to be replaced.