Guitar amplifier, 10 guitar amplifier – Applied Acoustics Systems Chromaphone 3 Upgrade Acoustic Object Synthesizer Plug-In (Download) User Manual

Page 60

Advertising
background image

60

The Editor View

The

Freq

knobs is used to control the central frequency of the filter. Turning this knob clock-

wise increases the center frequency. The

Depth

knob controls the excursion of the center frequency

of the filter around its center frequency. Turning this knob clockwise increases the excursion of the
center frequency. Finally, the

Rate

knob controls the frequency or rate of the modulation of the

center frequency of the filter. Turning this knob clockwise increases the rate of the modulation.

Figure 35: Frequency response of a notch filter.

The

Mix

knob allows one to mix the dry and wet signals. In its leftmost position, there is no

output signal from the chorus and one only ears the dry input signals. In its rightmost position, one
only ears the wet signal from the chorus module. In its center position, there is an equal amount of
dry and wet signal in the output signal from the module. Finally, the

Output

know is used to adjust

the output level of this module.

5.4.10

Guitar Amplifier

The

Guitar Amplifier

module is a versatile 2-channel amplifier with speaker cabinet and spring

reverb. With relatively few parameters, this amplifier module allows one to obtain a rich variety of
sounds for different music styles.

The amplifier section of this module is switched

on

or

off

by clicking on the LED located in

the top right corner of the section labelled

Amp

on the left of the module. The

Channel

LED allows

one to switch between the two channels of the amplifier. Channel one offers clean to semi-dirty

Advertising