Epiphan Pearl Mini Live Video Production System with 512GB SSD (NA/JP) - Manual (Page 324)

Pearl Mini User Guide Configure AFU to SCP client parameters
2. Specify the target Server address. If your system is configured with DHCP or has a valid DNS
configuration (see Configure DHCP ), you can use the server’s fully qualified domain name instead of the
IP address.
3. Enter the target Server port, if you have configured the server to use something non-standard. Leave this
value blank to use the default port.
4. Specify the Server share. This is the CIFS share name or the name of the shared folder on the server. If
needed, request this value from the network administrator.
5. If the system is in a different domain than the server or if it is part of Active Directory, enter the Domain
name of the CIFS server.
6. Specify a username for the CIFS Server in the Login field. The user must have write permissions for the
share folder.
7. Specify the password for the user in the Password field; the value is masked by dots.
8. Select Use temp file to name files with a temporary filename extension (.part) on the server until upload is
complete.
9. Click Apply
Configure AFU to SCP client parameters
You can automatically upload recordings to an SCP (secure copy) client when you select SCP as the AFU
protocol transfer type using the Admin panel.
The following table describes the parameters to configure AFU to an SCP client.
Table 61 SCP Automatic Upload Configuration Parameters
Name Description
Server address The IP address (or fully qualified domain name) of the destination server.
Server port The SCP port used by the target server. Standard port is 22.
Login Username for the SCP server.
Password Password for the SCP user.
Prerequisites
l Channels and recorders are already added for AFU, see Set channels and recorders to include in AFU .
l AFU is enabled and the parameters configured, see Enable AFU, schedule, and set options .
l Ensure there is adequate space on the destination device, if space may be an issue disable the AFU
option 'Remove after upload' to avoid accidental deletion of files.
Configure AFU upload to an SCP client using the Admin panel
1. From the Automatic File Upload configuration page, select SCP Client as the protocol transfer type.
313